Monitor W625 in the making!
...

• Hi-Vi 6.5" W6 Woofer
• Vifa DX25T Tweeter
• Ported Enclosure
• Custom Crossover using FRD's Passive Crossover Designer 3.0
• Oak side panels with solid black front and back
• Inexpensive but great sounding 2-way using somewhat non-traditional drivers

AI 10S Finished Surround Sound Speakers!
...

• 5.25" Speaker Buyout from Parts Express (Altec Lansing I believe)
• 1/2" Polymer Dome Tweeter
• Bi-bole/Di-pole Speakers on a budget
• Stone finish with spray paint from Home Depot
• They serve their purpose without much class or style

Two-way Center Channel
...

Click on picture for more details

• 6.5" Vifa M17SG-09-08
• Morel's DMS-29
• Fully shielded for video
• Piano black finish (semi-glossy)
• Oak ends finished in Minwax Special Walnut
• 12db/octave L-R crossover
• Sealed enclosure Qtc = .71

Swans M3 Floorstanding Speaker System - NEW
...

Click on picture for more details

• Hi-Vi RT1C-A Aluminum Ribbon Tweeter
• Hi-Vi F5 5" Kevlar Cone Midrange
• (2) Hi-Vi W6 6.5" Woofers
• Frequency Response 37-30,000 Hz
• Crossover points 300 and 3.3KHz
• 12 dB/octave Linkwitz-Riley type
• 100 watts continuous, 200 Peak
• 41"x9-1/2"x14-7/8" (HxWxD)
• Four Toe Spikes
• Gold Plated Binding Post Terminals
• Large 4" Port
• 14 Gauge MIT Internal Wiring Structure
• Red Oak Sides and with Flat Black front and top
• Exceptional Sound Quality and Image Detail
• Weight:  98 pounds each

TC Sounds 15" Subwoofer
...

Click on picture for more details

• 15" TC Sounds Driver
• 5.00 cubic foot enclosure
• Tuning frequency 23 Hz
• 800 watts RMS/1600 watts peak
• Dual 4 ohm voice coils
• Patented Tri-Way Shelf Bracing Technique
• Gold Plated Binding Post Terminal
• Flat Black Enamel Finish
• 21"W x 24.5"H x 26.5" D
• Dual 4" Front Firing Ports
• Egg Foam Insulation

10Triple10 Passive Radiator Sub
...

Click on picture for more details

• Single Long Throw 10" Woofer
• 3 10" Flat Passive Radiators
• 1.35 cubic foot enclosure with 30 Hz tuning
• 3 dB down point 35 Hz
• Green Marble Top
• Dual gold plated 5-way binding posts
• 200 watts RMS/350 Peak
• Dual 4 ohm voice coils

Ported Shiva in QB3
...

 Click on picture for more details

• 12" Shiva Subwoofer
• Ported 2.90 cubic foot enclosure
• Tuning Frequency of 25 Hz
• 500 Watts RMS/800 Peak
• Nominal impedance 4 ohms
• Single gold plated binding post terminal
• 3 dB down point 27 Hz
• Painted in black lacquer

EBS Shiva with 15" Passive Radiator
...

 Click on picture for more details

• 12" Shiva Subwoofer
• 15" Avatar PR-15
• 4.75 cubic foot enclosure
• Tuning Frequency of 18 hz
• 3 dB down point 20 Hz
• Dual gold plated binding posts
• Black grill cloth
• Covered in Birch plywood and stained

15" Ultimate Attitude Subwoofer
...

Click on picture for more details

• 15" Ultimate Attitute Driver
• 2.75 cubic foot enclosure
• Tuning frequency 30 Hz
• 3 dB down point 38 Hz
• Covered in Mahogany Plywood
• Single gold plated binding post terminal
• Nominal impedance 4 ohms
• 350 Watts RMS/500 Peak
• 91 dB 1W/1M

Surround Speakers
...

• 5-1/4" MCM Aluminum Woofers  Click here to see the new ones.
• 3/8" Audax Polymer Dome Tweeter
• 6 dB/octave Crossover at 4KHz
• Covered in Mahogany
• Stained Deep Cherry
• 50 Watts RMS
• 75 Watts Peak
• 8 Ohm Impedance

Center Channel
...

• This is my ugly old center channel.  Click here to see the new one.

• 6-1/2" Vifa Woofer

• 1-1/8" Morel DMS-29 Soft Dome Tweeter

• Completely Shielded for TV use

• Cherry Red Stain

• Made of Plywood

• 50 Watts RMS

• 75 Watts Peak

• 8 Ohm Nominal Impedance

• Gold Plated Binding Post Terminals